The MPLS design feature is in BETA until the release of AVD 4.0.0. Changes to data models and default behavior for the MPLS design should be expected.
Connected Endpoints for MPLS design¶
- The MPLS design supports all connected endpoint variables already supported by l3ls-evpn barring the exceptions outlined in this document.
- The connected endpoints variables, define endpoints that connect to the fabric on pe interface(s).
- The connected endpoints are leveraged to define any device that connects to a pe switch ports, i.e.: routers, cpes.
- Connected endpoints key/value pairs are designed to be extended for your own needs and leveraged to configure the endpoint itself.
Connected Endpoints Keys¶
Some of the default connected endpoint keys for the
l3ls-evpn design are not supported by default with the
MLAG is not supported with MPLS-EVPN topologies, therefore it is necessary to use the EVPN A/A data model if a dual-homed port-channel configuration is desired. As such, the following data model will not render a functional configuration:
The short_esi variable is mandatory in order to have a functional multihomed port-channel: